Common Faults and Solutions of Dolomite Grinding Machine

Dolomite Grinding Machine plays an underestimated role in our industrial production, and it saves a lot of manpower and resources for industry. Dolomite Grinding Machine mainly consists of the host, analysis machine, blower, finished cyclone, plumbing fixtures and a motor of six parts. Among them, the host mill is from the rack, blade, roller, grinding ring, casing, motor and air intake volute composition, and auxiliary equipment jaw crusher, cabinet, electromagnetic vibrating feeder and bucket elevators and so on. So what is the common faults and solutions of Dolomite Grinding Machine?
First, wear of the grinding rolls, disc liner is a common fault of Dolomite Grinding Machine. When we operate Dolomite Grinding Machine, the roller and liner wear if gaps appear in the mating process, it will exacerbate the wear between them. With the addition of hot air and cement particles inside Dolomite Grinding Machine continues to scour trenches will produce, so disc and liner wear and impact will collide, grinding roller and disc worn light in weight will break. If they occur due to the impact cracking Lake, fracture, then the machine will be damaged, causing a serious accident. If this happens during operation of Dolomite Grinding Machine, the general welding repair will be useless, and replace the roller and the disc is not cheap. The best solution is to use polymer composite material which is excellent mechanical and plasticity can meet the requirements of the normal operation of the Dolomite Grinding Machine.

Second, wear of grinding roller bearing chamber in Dolomite Grinding Machine is a common fault. Roller bearings and bearing housing during operation once the gap, it will not be the normal operation of the bearing, so that, bearing run will generate more heat than usual, accumulated to a certain amount of heat will cause bearing burning phenomena, which produces wear or deformation. In general, the roller bearing of Dolomite Grinding Machine assembly is more stringent, companies will normally be placed in dry ice cooling assembly. When such a failure occurs, we can use the on-site repair of the way to fix the roller.

Third, leakage of reducer is one common fault of Dolomite Grinding Machine. If we frequently use Dolomite Grinding Machine, it may lead to gear leakage. The fault of Dolomite Grinding Machine will lead to wasting oil, and cause great inconvenience to repair and maintenance for the staff. When such a failure occurs, we can use fast curing rubber materials and repair materials for gear repair, this approach is simple to operate, and the effects repair are obvious.

These are Common Faults and Solutions of Dolomite Grinding Machine, if you want to know more about our Dolomite Grinding Machine, please connect with me now.

Learn more: http://www.dolomitegrindingmill.com/news/46.html

We are Shanghai Clirik Machinery CO., LTD.

If you want to know the price and other info about it,please connect with me.

Email：candyli@clirik.com

Phone：15021831484

Whatsapp：15021831484

related products：

Dolomite Grinding Mill

Dolomite Raymond Mill

Dolomite Ball Mill

Dolomite Vertical Roller Mill

Dolomite Hammer Mill

Related Websites:

http://www.dolomitegrindingmill.com/

www.grinding-mill.in

www.powder-mill.net

www.fine-mill.net

Clirik Low Consumption Grinding Ball Mill, Ball Mill Grinding

Product Description

Grinding ball mill description:
Grinding ball mill is the key equipment for grinding after the crushing process, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for the dry and wet grinding for all kinds of ores and other grind-able materials. 

This grinding ball mill machine changes the intrinsic grinding mill structure. Its body and ground plank are an integral whole. So when fixing, it can be lowered on a plane surface once only. Use double tiered roller axletree with centripetal spherical surface as the support of the host axletree can reduce energy cost by 30%. The intrinsic grille pattern forcing evacuation is instead by over fall pattern controlling one. This can improve the milling of the granule and the quantity dealt with is reduced by 15-20%.

Grinding ball mill working principle:
The grinding ball mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of steel balls in the chamber. The centrifugal force caused by rotation of barrel brings the steel balls to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished. 

Grinding ball mill features&advantages:
1. high production capacity and crushing ratio;
2. low power consumption, uniform particle size;
3. simple structure, easy to operate;
4. low investment cost, big profit;
5. perfect services, both before-sales servies and after-sales services.

Grinding ball mill Packing & Shipping

Packing: Conventional Packaging suitable for long distance transportation.

Shipping: 10-30 working days after recieving the deposit of the devices.

Company information:
Shanghai Clirik Machinery Co., Ltd. is located in Pudong New District, Shanghai, China, which is specialing in manufacturing grinding mills, Raymond mills, crushers and other associate accessories with decades experience. We have strong and professional technical and sale team. Customers' satisfaction is our final and forever pursuing.

FAQ:

1. What advantages does your grinding ball mill have? 

The main advantage of our grinding ball mill over other kinds of mills is that you can grind a friable or crystalline material to fine average particle size and classify in a very narrow particle size range at the same time. 

2. How does your milling machine compare with other methods of grinding such as a ball mill? 

Well designed, high speed mechanical mills can grind some friable materials into the low micron-size range; but, wear and product contamination is a serious problem, as is attritional heat. Practically, the high-speed mechanical mill (hammer etc. mill) cutoff is 200 mesh with a typical mid range of 80 mesh. Abrasive products will seriously erode most hammer mills, adding metallic contamination to the product. Materials that degrade with heat or have low melt temperatures are a problem in hammer mills because of the heat generated in the mill.

3. What particle size range does your grinding ball mill produce?

Typically the Clirik ball mill will grind friable or crystalline materials down to the 0.075 -0.4/0.89 mm average particle size range. Particles larger than 10 microns are generally hard-to-fracture polymers such as toner compounds or hard waxes, and some organic materials, but if a larger size is wanted, many products can be ground larger than 10 microns by reducing power to the mill or by increasing the rate of feed. Some products are simply polished to remove sharp edges by running at elevated feed rates with low grinding pressure, a process that changes how the material compacts.

Model	Cylinder rotary speed(r/min)	Loading ball weight(t)	Input size(mm)	Discharge size(mm)	Capacity(t/h)	power(kw)	Weight (t)
900×1800	39	1.5	≤20	0.075-0.89	0.8-2	18.5	4.6
900×3000	39	2.7	≤20	0.075-0.89	1-4	22	5.6
1200×3000	36	3.5	≤25	0.074-0.4	1.6-5	37	12.8
1200×4500	32	5	≤25	0.074-0.4	1.6-5.8	55	13.8
1500×3000	27	7.5	≤25	0.074-0.4	2-5	75	15.6
1500×5700	28	12	≤25	0.074-0.4	3.5-6	130	24.7
1830×3000	25	11	≤25	0.074-0.4	4-10	130	28
1830×6400	24	21	≤25	0.074-0.4	7-16	210	34
1830×7000	24	23	≤25	0.074-0.4	8-18	245	36
2100×3600	23	19	≤25	0.074-0.4	10-36	210	46
2200×4500	21	27	≤25	0.074-0.4	12-23	280	48.5
2200×6500	21	35	≤25	0.074-0.4	14-26	380	52.8
2200×7000	21	35	≤25	0.074-0.4	15-28	380	54
2200×7500	21	35	≤25	0.074-0.4	15-30	380	56
2400×4500	21	30	≤25	0.074-0.4	18-45	320	65
2400×8000	20	36	≤25	0.074-0.4	20-48	410	81
2700×3600	21	39	≤25	0.074-0.4	19-75	400	83
2700×4000	20	40	≤25	0.074-0.4	20-78	400	85
2700×4500	20	48	≤25	0.074-0.4	22-85	430	89
3200×4500	18	65	≤25	0.074-0.4	29-140	800	137
3200×5400	18	81.6	≤25	0.074-0.4	30-180	800-1000	146
3600×4500	17	88	≤25	0.074-0.4	35-210	1000	190
3600×6000	17	117	≤25	0.074-0.4	38-240	1250-1500	220
3600×8500	17	144	≤25	0.074-0.4	45-260	1800	260

If you want to know the price and other info about it,please connect with me.

Email：candyli@clirik.com

Phone：15021831484

Whatsapp：15021831484

Related Websites:

www.ultra-mill.com

http://www.baritegrindingmills.com/

http://www.grindingmill.in/   

http://www.limestonegrindingmill.in/

www.crusher-plant.net

www.hammer-crushers.net

Clirik Low Consumption Grinding Ball Mill, Ball Mill Grinding

Product Description

Grinding ball mill description:
Grinding ball mill is the key equipment for grinding after the crushing process, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for the dry and wet grinding for all kinds of ores and other grind-able materials. 

This grinding ball mill machine changes the intrinsic grinding mill structure. Its body and ground plank are an integral whole. So when fixing, it can be lowered on a plane surface once only. Use double tiered roller axletree with centripetal spherical surface as the support of the host axletree can reduce energy cost by 30%. The intrinsic grille pattern forcing evacuation is instead by over fall pattern controlling one. This can improve the milling of the granule and the quantity dealt with is reduced by 15-20%.

Grinding ball mill working principle:
The grinding ball mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of steel balls in the chamber. The centrifugal force caused by rotation of barrel brings the steel balls to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished. 

Grinding ball mill features&advantages:
1. high production capacity and crushing ratio;
2. low power consumption, uniform particle size;
3. simple structure, easy to operate;
4. low investment cost, big profit;
5. perfect services, both before-sales servies and after-sales services.

Grinding ball mill Packing & Shipping

Packing: Conventional Packaging suitable for long distance transportation.

Shipping: 10-30 working days after recieving the deposit of the devices.

Company information:
Shanghai Clirik Machinery Co., Ltd. is located in Pudong New District, Shanghai, China, which is specialing in manufacturing grinding mills, Raymond mills, crushers and other associate accessories with decades experience. We have strong and professional technical and sale team. Customers' satisfaction is our final and forever pursuing.

FAQ:

1. What advantages does your grinding ball mill have? 

The main advantage of our grinding ball mill over other kinds of mills is that you can grind a friable or crystalline material to fine average particle size and classify in a very narrow particle size range at the same time. 

2. How does your milling machine compare with other methods of grinding such as a ball mill? 

Well designed, high speed mechanical mills can grind some friable materials into the low micron-size range; but, wear and product contamination is a serious problem, as is attritional heat. Practically, the high-speed mechanical mill (hammer etc. mill) cutoff is 200 mesh with a typical mid range of 80 mesh. Abrasive products will seriously erode most hammer mills, adding metallic contamination to the product. Materials that degrade with heat or have low melt temperatures are a problem in hammer mills because of the heat generated in the mill.

3. What particle size range does your grinding ball mill produce?

Typically the Clirik ball mill will grind friable or crystalline materials down to the 0.075 -0.4/0.89 mm average particle size range. Particles larger than 10 microns are generally hard-to-fracture polymers such as toner compounds or hard waxes, and some organic materials, but if a larger size is wanted, many products can be ground larger than 10 microns by reducing power to the mill or by increasing the rate of feed. Some products are simply polished to remove sharp edges by running at elevated feed rates with low grinding pressure, a process that changes how the material compacts.

Model	Cylinder rotary speed(r/min)	Loading ball weight(t)	Input size(mm)	Discharge size(mm)	Capacity(t/h)	power(kw)	Weight (t)
900×1800	39	1.5	≤20	0.075-0.89	0.8-2	18.5	4.6
900×3000	39	2.7	≤20	0.075-0.89	1-4	22	5.6
1200×3000	36	3.5	≤25	0.074-0.4	1.6-5	37	12.8
1200×4500	32	5	≤25	0.074-0.4	1.6-5.8	55	13.8
1500×3000	27	7.5	≤25	0.074-0.4	2-5	75	15.6
1500×5700	28	12	≤25	0.074-0.4	3.5-6	130	24.7
1830×3000	25	11	≤25	0.074-0.4	4-10	130	28
1830×6400	24	21	≤25	0.074-0.4	7-16	210	34
1830×7000	24	23	≤25	0.074-0.4	8-18	245	36
2100×3600	23	19	≤25	0.074-0.4	10-36	210	46
2200×4500	21	27	≤25	0.074-0.4	12-23	280	48.5
2200×6500	21	35	≤25	0.074-0.4	14-26	380	52.8
2200×7000	21	35	≤25	0.074-0.4	15-28	380	54
2200×7500	21	35	≤25	0.074-0.4	15-30	380	56
2400×4500	21	30	≤25	0.074-0.4	18-45	320	65
2400×8000	20	36	≤25	0.074-0.4	20-48	410	81
2700×3600	21	39	≤25	0.074-0.4	19-75	400	83
2700×4000	20	40	≤25	0.074-0.4	20-78	400	85
2700×4500	20	48	≤25	0.074-0.4	22-85	430	89
3200×4500	18	65	≤25	0.074-0.4	29-140	800	137
3200×5400	18	81.6	≤25	0.074-0.4	30-180	800-1000	146
3600×4500	17	88	≤25	0.074-0.4	35-210	1000	190
3600×6000	17	117	≤25	0.074-0.4	38-240	1250-1500	220
3600×8500	17	144	≤25	0.074-0.4	45-260	1800	260

If you want to know the price and other info about it,please connect with me.

Email：candyli@clirik.com

Phone：15021831484

Whatsapp：15021831484

Related Websites:

www.ultra-mill.com

http://www.baritegrindingmills.com/

http://www.grindingmill.in/   

http://www.limestonegrindingmill.in/

www.crusher-plant.net

www.hammer-crushers.net

Calcium Carbonate Production Line for Sale

Product Description

—— five models: HGM80, HGM90, HGM100, HGM125,and HGM1680L

——finished production fineness: 300meshes~3000meshes, 5-74micron

——the capacity (ton/hour) ranges from 0.4T/H to 30T/H

Application of calcium Carbonate productione grinding machine, calcium carbonate production line; 

HGM Series calcium carbonate powder grinding machine is the equipment specializing in producing fine and superfine powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, such as calcite, chalk, limestone, dolomite, kaolin, bentonite, talc, mica, magnesite, illite, pyrophyllite and vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, rockphosphate, Kalium ore, pumice, etc., totally more than 100 kinds of materials.

Work Principle of calcium Carbonate productione grinding machine, calcium carbonate production line; ;

HGM series calcium carbonate grinding machine mainly consist of main unit, classifier, powder collector, dust cleaner, blower, muffler, sound-proof room, crusher, bucket elevator, storage hopper, and vibrating feeder.

After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, and then evenly sent to the upper distribution plate of the turn plate by vibrating feeder and sloping feeding pipe.

Features of calcium Carbonate productione grinding mill, calcium carbonate production line; 

High Efficiency

Under the same finished final size and the same motor power, the capacity of  calcium carbonate production line is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.

Long lifecycle of spare parts

The ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcite carbonate.

High safety and reliability

As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.

High fineness, flexible adjustment

The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤5μm.

Environment-friendly

The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.

Advanced intelligent speed control device

Convenient adjusting, more uniform particle size.

1. What advantages does your calcium carbonate production line have? 
—The main advantage of our calcium carbonate production line over other kinds of mills is that you can grind a friable or crystalline material to 5 - 74 microns average particle size and classify in a very narrow particle size range at the same time. There are no moving parts to wear out or generate heat in our mill and no screens to plug or be punctured.

2. Can you guarantee the quality of your calcium carbonate production line?
---We have passed CE&ISO9001:2008, and our crushers have been exported to Eastern Europe, Middle East, Africa, South Asia, Southeast Asia, Oceania, America, etc.

3.How many years have you been manufacturing the machine?
---8 years. Since the foudation of our company, we have been manufacturing the machine, which updated many times, now the machine runs stable and of high quality

 

Model	HGM80	HGM90	HGM100	HGM125	HGM1680L
Ring Diameter(mm)	800	900	1000	1250	1680
Ring Number (PCS)	3	3-4	4	4	4
Roller Number(PCS)	18-21	24-29	28-36	30-44	30-40
Main Shaft Speed (r. p. min)	230-240	200-220	180-200	135-155	120-130
Input Size (mm)	≤10	≤10	≤15	≤15	≤20
Finished Size (um/mesh)	74-5 (200-2500)	74-5 (200-2500)	74-5 (200-2500)	100-6 (150-2000)	100-9 (150-1500)
Capacity (t/h)	0.4-4.5	0.6-6.5	1-9	2-16	3.8-30
Outlet Size L*W*H (m)	13.9*4*6.2	14.7*4.8*7.2	18*4.6*8.6	14*9*10.25	26.3*7.5*11.9

If you want to know the price and other info about it,please connect with me.

Email：candyli@clirik.com

Phone：15021831484

Whatsapp：15021831484

Related Websites:

http://www.dolomitegrindingmill.com/

www.grinding-mill.in

www.powder-mill.net

www.fine-mill.net

The Latest R & D Mica Grinding Machine with CE/ISO

Product Description

Mica grinding machine Application: 
Feed Size: 10-20mm
Finished Size:150-3000mesh
Capacity: 0.4-30T/h
Materials: HGM series of Mica grinding machine is mainly applied to the processing of Mohs hardness of < 9 nonflammable and explosive of brittle materials, such as: Coal, mica, talc, graphite, quartz, fluorite, calcite, dolomite, limestone, kaolin, bentonite, barite, potassium feldspar, bauxite, coal gangue.
HGM series of ultra-fine grinding mill is widely used in paint, paper, paint, rubber, plastic, packing, cosmetics, chemical products and other industries. 

Mica grinding machine introduction: 
HGM series ultrafine grinding is based on years' experience of accumulated mill production, absorbing the Swedish advanced mechanical manufacturing technology is a new superfine powder and through the test and improvement for many years and development (325-2500) processing equipment. It is the crystallization of advanced technology, which is leading the world trend of the latest milling machine

Mica grinding machine Features: 
1. High Efficiency
Under the same finished final size and the same motor power, the capacity of Iron Oxide Grinding Machine is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.
2. Long lifecycle of spare parts
The ring and roller are forged by special material with high utilization, the lifetime can reach 2-5 years for grinding calcite carbonate.
3. High safety and reliability
As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.
High fineness, flexible adjustment
4. The final fineness of the grinding materials can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤ 5μ M.
5. Environment-friendly
The application of pulse bag filter and muffler greatly alleviates dust pollution and noise.
Advanced intelligent speed control device
Convenient adjusting, more uniform particle size


Mica grinding machine Working Principle: 
The main motor drives main axle and every layer rotating by the power of reducer. Dial drives numbers of rollers rolling and rotating in the ring by pintles. Big materials are crushed into small particles by hammer crusher. Then they are sent to store house by elevator.

The complete set of HGM Mica grinding machine: 
The whole set of HGM Mica grinding machine onsists of main mill, powder classifier, speed reducer, blower, jaw crusher, bucket elevator, vibrating feeder, storage bin, bag filter, pipe and fitting, cyclone powder collector, electric control cabinet, electric motor, etc.

About CLIRIK
Shanghai Clirik machinery Co., Ltd located in Pudong New district of Shanghai, china, a factory of 50,000 square meter for grinding mill plant production, another factory of 40,000 square meter also in Shanghai for all kinds of crushers production.we are near the Shanghai Pudong New Airport, only 15minites by car, Welcome you come to visit our factory.

Inquiry Service
Please fill in your need products and your message and do not forget mail and/or phone if you like to be contacted. 

We are the professional machine manufacturer in China.
I need to ask you some details for sending you the more suitable quotation,

1. What is the raw material do you want to process? 
2. What is the capacity per hour do you need? 
3. What is the raw material input size? 
4. What is the output size of your product? 

I hope you can tell me these details, i will give you the best quotation ASAP, thanks. Your satisfaction is our greatest pursuit, we would like to sincerely for your service! We look forward to your inquiry!

Model	HGM80	HGM90	HGM100	HGM125	HGM168L
Ring Diameter(mm)	800	900	1000	1250	1680
Ring Number (PCS)	3	3-4	4	4	4
Roller Number(PCS)	18-21	24-29	28-36	30-44	30-40
Main Shaft Speed (r. p. min)	230-240	200-220	180-200	135-155	120-130
Input Size (mm)	≤10	≤10	≤15	≤15	≤20
Finished Size (um/mesh)	74-5 (200-2500)	74-5 (200-2500)	74-5 (200-2500)	100-6 (150-2000)	100-9 (150-1500)
Capacity (t/h)	0.4-4.5	0.6-6.5	1-9	2-16	3.8-30
Outlet Size L*W*H (m)	13.9*4*6.2	14.7*4.8*7.2	18*4.6*8.6	14*9*10.25	26.3*7.5*11.9

Unit: KW	HGM80	HGM90	HGM100	HGM125	HGM168L
Main Unit	55-75	2*45	132	185-200	315
Classifier	18.5	18.5	30	37-4*15	5*18.5
Blower	45	55	75	2*45-2*55	2*75-2*90
Crusher	18.5	18.5	18.5	45	75
Bucket Elevator	3	3	4	4	7.5
BeltConveyor Feeder	2.2	2.2	2.2	3	3
Spiral Conveyor	3	3	3-4	2*3	2*5.5
Discharging Valve	2*0.75	1*0.75  1*1.1	2*1.1	2*1.1	2*0.75-2*1.5
Air compressor	11	15	22	2*15-37	55
Remark: For the data with prefix such as "2*xx",it means there are two motors 2*0.75,configuredfor one item Forexample,discharging valve,HGM80 with configuration it means there are 2 pieces of 0.75KW motors installed with discharging valve.

If you want to know the price and other info about it,please connect with me.

Email：candyli@clirik.com

Phone：15021831484

Whatsapp：15021831484

Related Websites:

www.hammer-crushers.net

www.ultra-mill.com

http://www.baritegrindingmills.com/

http://www.grindingmill.in/

http://www.limestonegrindingmill.in/

www.crusher-plant.net